To expand the range of your wireless network and keep your internet connection steady, Wavlink AX1800 Setup is essential. You will be guided through the setup procedure for a flawless experience by this in-depth tutorial.

How to Setting up Wavlink AX1800 Extender Manually?

The Wavlink AX1800 extender can be manually configured using the steps below:

• Plug in the Wavlink AX1800 extender into a power outlet.
• Use a smart device.
• Open a web browser and type “192.168.10.1” or “ap.setup” into the address box, then hit Enter.
• The screen will display the Wavlink extender login page.
• To continue, enter your username and password.
• To complete the Wavlink AX1800 setup, adhere to the directions displayed on the screen.
• When three of the LED lights turn solid green, your extender configuration is complete.

This manual approach guarantees an easy setup. Please feel free to get advice from our qualified professionals by calling the toll-free number or using the live chat feature if you have any questions.

Wavlink AX1800 Setup: WPS Method

The WPS method offers a quick way to connect your extender to your existing router without the need to manually enter network credentials. Here’s how:

• Connect the Wavlink AX1800 extender to an electrical outlet.
• On the extender, locate the WPS button. Hold it down for about 5 seconds, or until you see the WPS LED blink.
• Within the following two minutes, press the WPS button on your WiFi router.
• The WPS LED on the extender goes solid green when the connection is successful.

These are the fundamental phases in the WPS setup procedure. Please refer to the user manual or official documentation for your device for more specific instructions.

How to Perform a Reset on the Wavlink AX1800 Extender?

Follow these procedures to restore your extender to factory settings if necessary:

• The reset button on your extender is typically a little hole with the word “Reset” written on it.
• Press the reset button with a paperclip or pin and hold it there for around 10 seconds.
• Rebooting the extender will reset all settings to their initial positions.

Note: Before doing a factory reset, make sure you have the appropriate setup information because doing so will delete all configurations and settings on your extender.

Updating Firmware on the Wavlink AX1800 Extender:

For optimal performance and security, keep the firmware on your extender up to current. As follows:

• The “Downloads” or “Support” sections can be found on the Wavlink support page.
• Find your extender’s model number and download the most recent firmware.
• Go to the extender’s setup page as described in “Manual Setup Method.”
• In the settings menu, look for a “Firmware Update” or “Software Update” option.
• To finish the update, upload the firmware file you obtained and follow the on-screen directions.

Always consult to the user manual or official directions before upgrading the firmware because it may differ based on the brand and version of your extender.

Troubleshooting Steps:

Try these troubleshooting methods if your Wavlink AX1800 extender is having problems:

•  For a powerful signal, make sure the extender is within your router’s coverage area.
•  Connectivity problems are frequently resolved by restarting the extender.
•  If neighboring electronic gadgets or obstructions obstruct the WiFi signal, move the extension.
•  Check for mistakes in the SSID and password of your WiFi network.
•  Make sure the firmware on your extension is current.
•  As a last resort, reset the extender to factory settings and configure it again.

You can optimize the functioning of your extender and take advantage of wider WiFi coverage with better internet speeds by following this Wavlink AX1800 setup guide and troubleshooting advice. Contact our technical experts at our toll-free hotline for more help.